| Home | Contact Us | Vehicle Sales | Beetle Parts | Bay Parts | Split Parts | T25 /T4 Parts | Type 3 / 4 Parts | VW Shows | VW Links |
Type 2 gearbox codes and Ratios...
Well... thats the plan! - Anyone have the information? -I'm trying!
There doesn't seem to be a conclusive list anywhere... so I've started compiling this list...
Research so far is
confusing.... some indication can be gained from counting the
strengthening ribs that go across the Gearbox box above the CV joints..
3 rib = Std 1600cc "002" '1967 - 6/73 ish (there are 2 types - The
Early one that isn't supported over the bell housing and the later type that is
('72 on)
5 rib = rare-ish 6/73-1975 ish 3.78 ratio 1st gear
Stronger than the 3.80. These are not as strong as the 6-ribs, but they are
stronger than the 3-rib transmissions.
6 rib = 2L "091" 1976-80 ish
any comments?
THIS PAGE IS UNDER CONSTRUCTION AND I NEED YOUR HELP!!
|
Codes |
Model |
Notes |
| CA | 1600cc / 1700cc | 4 Speed Manual - from case number 0123 698 (early bay) |
| CB | 1600 / 1700cc | 4 Speed Manual - Mountain Ratio |
| CC | 1600 / 1700cc | 4 Speed Manual with LSD |
| CD | 1600 / 1700cc | 4 Speed Manual -Mountain with LSD |
| CE | 1600 / 1700cc | 4 Speed Manual -from August 1971 |
| CG | 1600 | 4 Speed Manual |
| CK | 1700? | 4 Speed Manual |
| CM | 1800 | 4 Speed Manual |
| CN | 1800 | 4 Speed Manual - Aug 73 onwards |
| CP | 2000 | 4 Speed Manual |
| CT | 2000 | 4 Speed Manual |
| CU | 1600 | 4 Speed manual |
| CV | 1600 | 4 Speed manual |
| DE | 1600 | 4 Speed Manual |
| NA | Auto | 3 speed - from September 1972 |
| NB | Auto | 3 Speed |
| NC | Auto | 3 Speed |
| ND | Auto | 3 Speed |
| NE | Auto | 3 Speed |
| NF | Auto | 3 Speed |
| NG | Auto | 3 Speed |
| NJ | Auto | 3 Speed |
Gear Ratios... the info so far...
1st gear 3.80
2nd Gear 2.06
3rd gear 1.26
4th gear 0.82:1 to chassis 213 2068 547 and 0.89:1 from chassis 213 2068 548 (Final drive of 5.375:1 (5.857:1 for Mountain))
or 1600 4th gear 0.81:1 with Final drive 8.43:1
17/18/2000 4th gear 0.89:1 with Final Drive 7.34:1
Reverse 3.80 upto chassis 2112276560 then 3.61
Final drive
5.375 through chassis 213 2300 001 then
4.857 from chassis 214 2000 001
"A type 4 engine (17,18,2000) will go onto a 1600 box no
probs. gearboxes for type 4 engines have a slightly longer input shaft so a 1600
won't fit onto that."
there are people who'll say grind the shaft down, but i fell that's a bit of a
waste and it's no big deal to remove bellhousing and change the shaft..
shaft goes further into Type 4 lump. but bell housings (1600s as well!) were
seemingly all a bit longer after 75............. with a different (longer throw)
starter motor too!
Please note that this information is
provided as a GUIDE ONLY we cannot
be held responsible for any errors.
Email info@partsemporium.co.uk
for details!
